Skip to content 
Sort By
Application
Categories
Features & Benefits
1. Designed to withstand extremel high staticloads, win loads and seismic loads with excellent bonding strengt, elasticity and weather-resistant bonding strength.
2. Suitable for bonding glass to glass, glass to metal (such as aluminum and stainless steel), and glass to concrete and stone.
3. High modulus, high tensile strength, excellent UV resistance and weather resistance.
4. It has a wide temperature range and can maintain stable performance in the temperature range of -60℃to+150℃.
Applications
1. Structural bonding and glass assembly applications of glass curtain wall, aluminum curtain wall, clay panel curtain wall and metal curtain wall.
2. The structure of the insulating glass is sealed twice.
3. Other building structure glass assembly applications.
Technical Information
The operating conditions were 23 ± 2℃ and relative humidity 50 ± 5%. The test results are as follows:
| TEST METHOD | PROPERTY | UNIT | STANDARD | RESULT |
| GB/T 13477 (ISO 7390) | Slump / Sag | mm | ≤3 | 0 |
| GB/T 13477 (ASTM D 2377) | Tack-free Time | h | ≤3 | 0.8 |
| GB/T 13477 (ASTM D 2377) | Tooling Time (After 20 min) | s | ≤10 | 2.2 |
| GB/T 531.1 (ISO 7619) | Hardness | Shore A | 20~60 | 43 |
| GB 16776 (ASTM C 792) | Heat Aging | / | / | / |
| GB 16776 (ASTM C 792) | Weight Loss | % | ≤10 | 2.5 |
| GB 16776 (ASTM C 792) | Cracking | / | None | None |
| GB 16776 (ASTM C 792) | Chalking | / | None | None |
| GB/T 13477 (ISO 8339) | Tensile Strength | MPa | / | / |
| GB/T 13477 (ISO 8339) | 23℃ | / | ≥0.60 | 1.13 |
| GB/T 13477 (ISO 8339) | 90℃ | / | ≥0.45 | 1.02 |
| GB/T 13477 (ISO 8339) | -30℃ | / | ≥0.45 | 1.3 |
| GB/T 13477 (ISO 8339) | After water immersion | / | ≥0.45 | 1.01 |
| GB/T 13477 (ISO 8339) | After Water-UV exposure | / | ≥0.45 | 1.09 |
| GB/T 13477 (ISO 8339) | Adhesion Failure | % | ≤5.00 | 0 |
| GB/T 13477 (ISO 8339) | Elongation at break (at 23℃) | % | ≥100 | 152 |
Color
color: black, or be customized as requested.
construction method
Clean all seams and remove all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealant, surface dirt or protective coatings. The base component and curing agent are 9:1-11:1 by volume and 14:176:1 by weight. Use an airless two-component silicone applicator to mix the base component and curing agent thoroughly. Trimming should be done immediately after gluing. Trimming can be accomplished within 5 minutes of application using a brush or tool dipped in solvent. Masking tape can also be used to mask the surface before gluing and remove the tape immediately after application for a neat finish surface. After use, it is recommended to clean the sizing equipment thoroughly with base components or special solvents.
Why Choose Finos
Expertise & Advanced Laboratory
With 20+ years of expertise and state-of-the-art laboratory equipment, we ensure every batch meets the highest global standards.
Proven Customization Success
Deliver custom formulas and colors, helping many clients achieve market success with high-performance, tailor-made sealant solutions.
Advanced Reverse Engineering
We analyze and replicate complex formulas, delivering high-performance alternatives that match or exceed original product specifications.
Traceable Quality Assurance
Every shipment is sampled and tested quarterly, with transparent reports sent to clients for guaranteed long-term reliability.
Get Free Tailored Sealing Quote in 24 Hours!
